Fontana Commercial Brushed Gold Finish Touchless Automatic Sensor Faucet

Our Fontana Commercial Brushed Gold Finish Touchless Automatic Sensor Faucet is a brilliant solution for a specialty-designed restroom being a simple 90-degree shape and charming brushed gold color. Its built-in feature of a 30-second shut-off makes it more suitable for public restroom places. It is appreciated for both its beauty and triple-edged savings (water, energy, and cost). Its intelligent design prevents water from dripping. You will also avoid contamination and cross-contamination, and minimize waste of water by using this smart automatic faucet. In any high-traffic restroom avoiding contact with a manual faucet helps avoid contact with germs that are collecting on handles and this smart faucet is not only hygienic but will immediately reduce water waste by eliminating unnecessary and unattended water flow. The automatic faucet provides water only when needed. Additionally, since these faucets are preset to shut off after approximately 30 seconds, accidental flooding can't occur if a person leaves it running. And, because they are hands-free, they help reduce the spread of germs and keep the vanity area clean. Intelligent: with its micro-computer controlling its action, the faucet can self-adjust its best detection zone as per the color and shape of the lavatory! The Sensor Faucet finish is Brushed Gold, with a built-in Infrared AI Smart-Chip No Water Dripping Design with 100% Touch-free operation. Reduces the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucet. Cut down on water usage by minimizing waste of water by eliminating unnecessary or unattended water flow.

ontana Commercial Brushed Gold Finish Touchless Automatic Sensor Faucet Specifications

• Diameter of inlet pipe: DN15
• Diameter of outlet pipe: DN15
• Faucet height: 7.87" (200mm)
• Spout Length: 4.13" (105mm)
• Water Pressure: 0.05Mpa - 0.7Mpa
• Power: DC.6V
• Power Consumption: 0.5MW
• Detection Zone: Factory set 25cm/10" (based on standard inductive board)
• Ambient Temperature: 1 - 45 °C / 33.8 -113 °F
• Degree of protection by enclosure: 1P56
• Battery: 4 x 'AA' size cells
• Operational water pressure range: 0.05 - 0.6MPa
• US standard water supply pipe size: DN15 (G1/2")
• Ambient temperature range: 0.1 - 45ºC
• Sensing distance: 9.84" (25cm)
• Time delay: 0.5 seconds
• Operation duration: Power will automatically cut off after continuous use for 60 seconds
• Pop-up drain: No
• Color: Brushed Gold Finish

Sensor Faucet Advantage